top of page
Sublimation HTV Sample Pack

Packs include (amount ordered) in Siser® White Glitter HTV, EasySubli® and EasySubli® Mask.  Set includes 8.5x11 Sheet of Glitter and 8.4x11 Sheet of EasySubli® and EasySubli® Mask

These are great for sampling items or just needing a small quantity.


Great for Sublimation!  Siser® HTV GLITTER

Bling out plain designs for maximum appeal with the best Glitter HTV on the market! Available in over 30 vibrant colors, Glitter contains maximum sparkle without shedding any glitter flakes. Kids of all ages love the shimmer and pop, and since it’s CPSIA Certified it’s safe to apply on kids clothing. 


Glitter is CPSIA Certified, so it’s perfect for decorating children’s clothing and accessories.

Specifications: PU Composition • Pressure sensitive backing • Glitter finish • 325 Microns/12.8 Mils • 45°/60° blade • Do not layer


Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester


Material may vary in width by 1/2-1 inch

Material may peel from carrier/liner, we recommend smoothing it down before use.




Siser® EasySubli®

You already know Siser® Glitter HTV can be sublimated, but what if you want to spare yourself the sparkle? Siser has the sublimation solution for you! Now offering, EasySubli®, the matte heat transfer vinyl that’s receptive to sublimation inks! Siser EasySubli HTV is the key to decorating colored polyester (excluding sublimated polyester garments) and cotton blends. Never be limited to white polyester again when you switch to EasySubli!

Achieve the brightest colors and best results when paired with the specially developed printing profile and Siser EasySubli Inks by Sawgrass. Available for the Virtuoso SG400 and SG800, Siser EasySubli Inks can do more than just print on EasySubli! Use Siser EasySubli Inks to achieve all your standard dye-sub needs as well, so there’s no need to switch out inks between projects. The low application temperature of 311°F even allows you to decorate heat sensitive fabrics like tri-blends and rayon!

EasySubli is approximately 220 microns/8.67 Mils




Siser® Easysubli® Mask

Now that you have the sublimation solution to colored polyester and cotton garments, you’ll likely need the silicone solution for working with EasySubli heat transfer vinyl. EasySubli Mask is unlike any other Siser® TTD Masks for print and cut heat transfer vinyl. The masking process is familiar: use a squeegee to bond the mask and printed HTV in order to keep multiple pieces aligned and applied all at once. However, the mask itself is constructed differently and as a result is incompatible with Siser ColorPrint™ materials. Additionally, TTD Masks are not compatible with EasySubli HTV.

For ease of use, EasySubli Mask is clear, silicone based, and comes on an aerated backing. The extra tacky adhesive is key to gripping printed EasySubli HTV to remove it from the original static backing and expose the heat activated adhesive side of the material. At this point, EasySubli is ready to be heat applied or you can place it on the mask’s aerated backing for storage.

Sublimation HTV Sample Pack

SKU: 0033
PriceFrom $7.65
  • Glitter HTV

    Application instructions (home iron)

    • Set iron dial between Cotton and Linen
    • Cover design with Kraft paper or non-stick cover sheet
    • Place on flat, hard surface (ironing board not recommended)
    • Press iron with medium/firm pressure (do not slide iron)
    • Press each section of design for 10-15 seconds
    • If areas of design lift after application, replace cover sheet
    and re-press for 10 seconds
    • Peel carrier hot or cold

    Application Instructions (heat press)

    • Cut in reverse
    • Weed excess material
    • Preheat garment for 2-3 seconds
    • Apply design at 320°
    • Use light/medium pressure for 10-15 seconds
    • Peel carrier warm



    Print, cut and weed material.

    Cover with Heat Transfer Cover Sheet or Multi Purpose Paper

    Preheat garment for 2-3 seconds

    Apply design at 311F/110C

    Use medium pressure for 15 seconds

    Peel EasySubli mask hot



    Glitter HTV


    Blade: Standard
    Setting: Iron On+

    Silhouette Cameo:

    Blade: Standard, 4
    Setting: Heat Transfer
    Material: Glitter
    Speed: 8
    Thickness: 11

bottom of page